Page 1 of 2

Big Guys - Round or Square bases?

Posted: Mon Mar 02, 2015 2:06 am
by Sargon
As someone who is new to the tabletop world, I'm curious whether there is any certain preference toward round or square bases for big guys. Is it ok to use either type of base, even if they are larger than a typical 30mm pitch? I see some big guys that appear to have 40mm square bases. Are those acceptable for play even though they won't fit on most pitches?

Re: Big Guys - Round or Square bases?

Posted: Mon Mar 02, 2015 2:10 am
by GalakStarscraper
Personal opinion.

No ... the 40mm do not fit a normal pitch correctly circle or square.

I spent a couple thousand dollars to have a 30mm base created just so Big Guys could be based and fit on a BB pitch. Use those.

You can get them from several places:
http://www.em4miniatures.com/acatalog/M ... BASES.html (Round 30mm multi-purpose bag of 10
Ref: TBASE13)

http://www.impactminiatures.com/index.p ... id=SP_PB30

Re: Big Guys - Round or Square bases?

Posted: Mon Mar 02, 2015 2:36 am
by Sargon
GalakStarscraper wrote:No ... the 40mm do not fit a normal pitch correctly circle or square.

I spent a couple thousand dollars to have a 30mm base created just so Big Guys could be based and fit on a BB pitch. Use those.
That is exactly what I needed to know. Thanks!

Re: Big Guys - Round or Square bases?

Posted: Mon Mar 02, 2015 6:05 pm
by DeeTee
Sargon wrote:
GalakStarscraper wrote:No ... the 40mm do not fit a normal pitch correctly circle or square.

I spent a couple thousand dollars to have a 30mm base created just so Big Guys could be based and fit on a BB pitch. Use those.
That is exactly what I needed to know. Thanks!
Money well spent IMHO.

30mm bases every time.

Re: Big Guys - Round or Square bases?

Posted: Mon Mar 02, 2015 10:35 pm
by Olaf the Stout
It's not a rule per-se, but it is common practice for Blood Bowl minis to be based on round bases.

It's a little odd really when square bases would make it easier to show prone vs stunned for some minis. That said, I do prefer the look of round bases.

I'd also avoid 40mm bases unless you really can't fit your mini on a 30mm base. You can probably get away with it for a single big guy, but in general minis that overhang squares can be a bit of a pain when there's a big mass of players in the middle of the pitch.

Re: Big Guys - Round or Square bases?

Posted: Tue Mar 03, 2015 1:15 am
by Hucker73
A lot of Big Guy sized miniatures come with 40mm square bases because at the time the only base GW made that was larger than 25mm size (round and square) was the 40mm square base.

In second edition this larger base size was included in the rules so Ogres, Trolls, Minotaurs and Treemen (the only monstrous players in 2nd edition) actually took up four squares and made the rules even more convoluted and complex. Extra large scatter template requiring a D12 is a fun example.

Re: Big Guys - Round or Square bases?

Posted: Tue Mar 03, 2015 2:13 am
by spubbbba
Having played with a team that had 7 players using 4G mm round bases I can back up how much of a pain it is to play with them on a normal pitch.
That being said, square bases are actually more practical. It wasn't such an issue with old flat looking metal models, but a lot of the newer CAD drawn ones don't have obvious front or backs and tend to roll around when prone.

Re: Big Guys - Round or Square bases?

Posted: Tue Mar 03, 2015 11:34 am
by nonumber
40mm bases for big guys is very common, my Krox is on a 40mm base. 30mm would be a little more snug, sure, and I will probably get him on one eventually but if all you have is a 40mm base then go with it. Many people do.

However Blood Bowl players should be on round bases for me.

Re: Big Guys - Round or Square bases?

Posted: Thu Mar 05, 2015 6:19 am
by ramchop
I got a bunch of round 35mm bases from these guys

All my big guys go on these.

A big no to 40mm square bases - much too big for a standard board.

Re: Big Guys - Round or Square bases?

Posted: Sun Mar 15, 2015 11:36 pm
by Chris
Of course if you pick up one of the larger new BB teams and play on a 40mm square field, it looks good as well :)

Re: Big Guys - Round or Square bases?

Posted: Wed Mar 18, 2015 1:16 am
by bound for glory
GalakStarscraper wrote:Personal opinion.

No ... the 40mm do not fit a normal pitch correctly circle or square.

I spent a couple thousand dollars to have a 30mm base created just so Big Guys could be based and fit on a BB pitch. Use those.

You can get them from several places:
http://www.em4miniatures.com/acatalog/M ... BASES.html (Round 30mm multi-purpose bag of 10
Ref: TBASE13)

http://www.impactminiatures.com/index.p ... id=SP_PB30
i have a few(10 or so) big guys on toms 30mm round bases and i highly recommend them. i have well over 60 big guys, and if it was;nt for the fact that most are painted and flocked on 40mm rounds, all my big guys would be on the 30mm rounds. i just don't want to pull the painted big guys apart, but i do intend to use 30mm rounds in the future.

Re: Big Guys - Round or Square bases?

Posted: Tue May 19, 2015 1:16 am
by kozmo
Chris wrote:Of course if you pick up one of the larger new BB teams and play on a 40mm square field, it looks good as well :)
Seconded! I was skeptical of the 40mm pitch until I played a match on one. Now there's no going back.

Re: Big Guys - Round or Square bases?

Posted: Tue May 19, 2015 10:18 am
by Tritex
30mm round is easier for play but some figures just don't sit well on 30mm bases because of the leg poses so in this case 40mm round are best in my opinion.

Re: Big Guys - Round or Square bases?

Posted: Wed May 20, 2015 1:51 am
by Blammaham
40mm boards make topics like this just go away! :D S.

Re: Big Guys - Round or Square bases?

Posted: Wed May 20, 2015 8:35 pm
by bound for glory
i have, i think, 10 pitches. i should get a 40mm pitch...