A Goblin Scoreboard
Moderator: TFF Mods
- Wirelizard
- Rookie
- Posts: 53
- Joined: Sun Dec 01, 2013 5:09 am
- Location: West Coast, Great White North, Small Blue Planet
- Contact:
A Goblin Scoreboard
I built a very Lizardman themed set of BB sideboard temples last year, and having been playing Goblin and Skaven teams more recently I decided to build a scoreboard that was more gobbo-styled and less lizardy.
Thankfully, gobbos aren't known for being high-precision craftspeople so I was able to break out the coffee stir sticks and some other bits and crack on with it!
Here's how it looks so far, with a couple of my BB ads for colour and the actual scoreboard part in checkboard part.
The plan is to put rare earth magnets behind the scoreboard part to hold up the number placards and a third smaller placard in the centre as a weather indicator.
There's a bit more over on the blog: http://www.warbard.ca/2015/11/17/a-gobl ... -part-one/
Thankfully, gobbos aren't known for being high-precision craftspeople so I was able to break out the coffee stir sticks and some other bits and crack on with it!
Here's how it looks so far, with a couple of my BB ads for colour and the actual scoreboard part in checkboard part.
The plan is to put rare earth magnets behind the scoreboard part to hold up the number placards and a third smaller placard in the centre as a weather indicator.
There's a bit more over on the blog: http://www.warbard.ca/2015/11/17/a-gobl ... -part-one/
Reason: ''
-
- Experienced
- Posts: 149
- Joined: Mon Oct 11, 2010 1:24 pm
- Wirelizard
- Rookie
- Posts: 53
- Joined: Sun Dec 01, 2013 5:09 am
- Location: West Coast, Great White North, Small Blue Planet
- Contact:
Re: A Goblin Scoreboard
Scrap plexi I had in my stores bin, chosen because it was thick enough and rigid enough for the base. It's already been covered in sand and paint, and will get grass flock over it this evening.gninocker wrote:Loks allright gobbo-ish. Why the fluorescent base?
There's two pieces of wire superglued into holes in the plexi that go an inch or so up into each leg of the scoreboard to hold everything in place. Despite the gobbo-carpentry appearance I wanted the thing strong enough to withstand use!
Reason: ''
- Wirelizard
- Rookie
- Posts: 53
- Joined: Sun Dec 01, 2013 5:09 am
- Location: West Coast, Great White North, Small Blue Planet
- Contact:
Re: A Goblin Scoreboard
Finished the base, the bright shiny plexi has vanished!
Only thing left to do is magnets behind the checkerboard part, then the score number placards and weather placards.
After that it'll be on to the two team dugouts and marker tracks for turn and reroll, which I still haven't finalized the design for in my head.
Bit more over on the blog: http://www.warbard.ca/2015/11/19/a-gobl ... -part-two/
Reason: ''
- Wifflebat
- Emerging Star
- Posts: 476
- Joined: Sun Feb 02, 2014 5:56 pm
- Location: Ohio, USA
Re: A Goblin Scoreboard
I've got that same Treeman on my work table... Wish he didn't need such a huge base.
Scoreboard is terrific. I'm working on something similar, but I didn't think to add the advertisements. Totally swiping that!
Scoreboard is terrific. I'm working on something similar, but I didn't think to add the advertisements. Totally swiping that!
Reason: ''
I was Puzzlemonkey, but now I'm Wifflebat. Please forward my mail...
- Regash
- Ex-Mega Star, now just a Super Star
- Posts: 1610
- Joined: Sat May 30, 2015 11:09 am
- Location: Frankfurt, Germany
Re: A Goblin Scoreboard
For my personal taste, the wood needs some severe weathering.
But don't take this as critsism, I probably couldn't come up with something as good as yours.
But don't take this as critsism, I probably couldn't come up with something as good as yours.
Reason: ''
- Wirelizard
- Rookie
- Posts: 53
- Joined: Sun Dec 01, 2013 5:09 am
- Location: West Coast, Great White North, Small Blue Planet
- Contact:
Re: A Goblin Scoreboard
The wood of the scoreboard has gotten another round or two of weathering; I'll try to remember to snap a pic of it tomorrow sometime.
I've just finished the basic structure of the first dugout for this set; goblin carpentry gets even rougher! The base is scrap plastic sheet, most of the wood is coffee stir sticks with craft balsa for the beams.
The plan is to have ads along both sides of the hoarding along the back.
The turn- and reroll-trackers will be done up like low spectator terraces, with roughly the same footprint of the dugouts.
I've just finished the basic structure of the first dugout for this set; goblin carpentry gets even rougher! The base is scrap plastic sheet, most of the wood is coffee stir sticks with craft balsa for the beams.
The plan is to have ads along both sides of the hoarding along the back.
The turn- and reroll-trackers will be done up like low spectator terraces, with roughly the same footprint of the dugouts.
Reason: ''
- frogboy
- Legend
- Posts: 2083
- Joined: Sun Nov 15, 2009 2:20 pm
- Location: South Wales
Re: A Goblin Scoreboard
Ha them and us brilliant!
I like the dug outs...
You could try some wood varnish (dip) and mat varnish (spray) to give it an older worn feel. Just a suggestion haven't tried it myself but worth doing test bit first I reckon.
I like the dug outs...
You could try some wood varnish (dip) and mat varnish (spray) to give it an older worn feel. Just a suggestion haven't tried it myself but worth doing test bit first I reckon.
Reason: ''
I'm a British Freebooter, will play for any team including Undead (I have my own Apothecary). Good rates.
- Saebelsultan
- Super Star
- Posts: 760
- Joined: Wed May 07, 2014 7:02 am
- Location: Kicking off in stadiums around the Old World
- Contact:
Re: A Goblin Scoreboard
Brilliant!
Makes me to build another pitch too.
Please, keep us updated.
Makes me to build another pitch too.
Please, keep us updated.
Reason: ''
"This game is too good not to be played!" - Coach Pauli
Blood Bowl Beginner Kit
Saebelsultan's BB Dugouts
Blood Bowl Beginner Kit
Saebelsultan's BB Dugouts